The DTM connectors as little siblings of the well known DT series from Deutsch have been used by the Factory since the late 2010s in places where space is limited.

Simply the best connector system since the invention of the electric wire! This is the state-of-the-art solution for Custom wiring. Also use it as stock replacement, because the factory is using this system, too, and they know why. Our selection covers all necessities. The waterproof connections feature a locking system to prevent loosening. All components must be ordered separately.

Ingenious system of multi-purpose, screw-on wire connectors which delivers superior connections without any tools (except for stripping). It locks wire ends, taps hot wires and holds fuses without any installation problems and within less than a minute. No crimping, no soldering, no nothing. Of course, all connections are reusable and may be separated at any time.

These plastic coated AWG 18 (=0.82 mm²) electric wires feature the same colors or color combinations as the factory uses. Perfect for the repair of OEM wiring harnesses or custom fabrication. Available per meter or as 30 meter rolls.

Compact tool for single, multiple and fine stranded wires of 0.2 up to 6 mm² (AWG 24-10) cross-sections with standard insulation. It adapts automatically to the respective cable cross-section and prevents damage to the conductor. The handy shape and low weight provide high operation comfort. With its narrow head style it can also be used in confined areas. An integrated with wire cutter cuts copper and aluminium wires up to 2.5 mm². The length stop can be adjusted from 6.0 - 18.0 mm for cutting the same stripping lengths during repetitive work. The body is made from fibreglass-reinforced plastic, the interchangeable blades are made from special oil-hardened tool steel.

Terminal and thumb screw assembly which can be mounted on any suitable place on the motorcycle. It connects the battery’s ground (negative) terminal and cable with the frame....

A really smart way to safely join two wires are these dust- and moisture-proof, heat shrinking solder connectors. Just enter and overlap the bare wires ends from both sides, heat everything up with your hot air gun or Zippo lighter until the grommet shrinks and the solder ring melts and you are all set. No more crimping pliers required to create a safe and permanent wire connection. Glue rings at both ends of the connectors further increase safety. Temperature range: -55 °C to +135 °C. Shrinking temperature: +180 °C .

For the repair or custom fabrication of cloth covered wiring harness kits as used on classic Harleys and Indians.

Holds common fuses (max. 30 amp) and incorporates the Posi-Lock wire connector system.