The "Drop-In" lowering kits by Progressive Suspension make installation a 30 minute cake walk. Pull two inches out of the front end of your bike without the hassle of disassembling the forks or even changing out the oil and the whole process can be done with basic tools! You only have to lift the front end of the bike and - after removing the fork tube plugs - replace the stock fork springs with your new Progressive Suspension "Drop-In" springs. The longer stiffer one will control cushioning, the shorter softer one will lower the bike and control rebound simultaneously.
- for Hydraulic fork
- for 41 mm fork tubes
- fits FL(H/HT/T) 1949-2016 (except FLT/FLHT 2002-2005), FLHR 1994-2016, FX(D)WG 1980-2005, Softail 1984-2017
- steel, bare
- gross weight: 1.5 kg
PS Fork Lowering Kits on 1949-1977 models
41 mm forks 1949-early 1977 have a spring loaded oil separator below the fork cap which does not fit inside the PVC spacer. You can
Install short spring should below the longer one and cut spacer to 1/2”.