Hot Stuff in the Shop

  • AMAL Mk 1 Concentric Carburetters

    AMAL Mk 1 Concentric Carburetters

    If you check out photos of old Harley drag bikes they often had the trusty Linkerts swapped for flashy AMAL carbs and you bet that this wasn’t just for the looks. In their heyday ... more

  • Biltwell Gringo S Full Face Helmets

    Biltwell Gringo S Full Face Helmets

    So you dumped your old moped helmet just a couple of years ago? That´s too bad, now that these skid lids are back in business. But help is on the way since Biltwell decided to ... more

  • Fork Flat Side Bullet Lights

    Fork Flat Side Bullet Lights

    A sturdy, cast aluminum housing, a classic design and a faceted glass lens make these these turn signals stand out. The coped sides allow for low profile mounting to the fork or ... more

  • Stance Baecation Socks for Women

    Stance Baecation Socks for Women

    Palm trees and margaritas! The Baecation Crew will ensure the maximum relaxation (the kind you can only find while on vacation). Feature Terry loop in forefoot, heel, and toe for ... more

  • Hünersdorff On-the-Road Jerrycans

    Hünersdorff On-the-Road Jerrycans

    Small plastic jerrycans which can be easily carried in the saddlebags for those extra miles. UN-approved and suited for all sorts of gas. With pouring spout. more

  • CHP Heavy Duty Relief Springs for Flatheads

    CHP Heavy Duty Relief Springs for Flatheads

    For performance engines. These special relief valve springs are a tad stiffer than the standard springs in CHP Flathead oil feed pumps and will raise oil pressure by 5 psi. more

  • The Cyclery Clutch and Brake Pedal Pads

    The Cyclery Clutch and Brake Pedal Pads

    Variations of the accessory clutch and brake pedal pads with a The Cyclery logo embossed into the contact surface. 1/2” thick restoration quality. Sold individually. more

  • Ariel Rocket Mufflers

    Ariel Rocket Mufflers

    Custom version of an Ariel Red Hunter muffler with Rocket style end piece. The original design was slightly modified for universal use. Excellent quality, individually hand-made ... more

  • The Cyclery Transmission Stands

    The Cyclery Transmission Stands

    An essential when working on a transmission. These quality stands clamp into a vise and firmly hold the case during repair and overhaul. more

  • Bahco Magnetic Pick-Up Tools

    Bahco Magnetic Pick-Up Tools

    Oh, sh…! Once not properly paid attention and already the piston pin snap ring disappears in the crankcase. In such screwy mishaps, Bahco's flexible magnet lifters are a blessing. ... more

  • 1940-1965 Fuel Valves with Viton Tip

    1940-1965 Fuel Valves with Viton Tip

    Reproductions of the 1940-1965 push-pull shut-off assemblies which feature tips made from Viton rubber material for superior sealing of your fuel valve. Viton is resistent to all ... more

  • Cannonball StealthStarter Clutch Drive

    Cannonball StealthStarter Clutch Drive

    The Cannonball Clutch Drive electric start kit for rigid frame Big Twins converts your classic kickstart-only motorcycle to electric start. After installation you just push the ... more

  • Roadkill OUTSIDE OILERS T-Shirts

    Roadkill OUTSIDE OILERS T-Shirts

    Outside Oilers? No, this is not about the legendary switch in the method of getting the much needed lubrication fluids to the cylinder heads on vintage H-Ds. Which btw happened ... more

  • Ball Spring Pin for OEM Type Solo Seats

    Ball Spring Pin for OEM Type Solo Seats

    The original pin and spring are tried and trusted, but nevertheless a bit cumbersome with inevitable greasy finger tips. This ball spring supported lock pin makes releasing your ... more

  • S&S SH74-Series Early Shovelhead Style Engines

    S&S SH74-Series Early Shovelhead Style Engines

    The legendary Early Shovelhead generator engine was made by the Motor Company for 4 years only, from 1966-1969, and today it’s a rare bird. This version by S&S with stock 74 cubic ... more

  • Greasy Kulture Magazines

    Greasy Kulture Magazines

    Greasy Kulture started in 1999 as an obsession and a love for the aesthetics of yesteryear, from the early motorcycle clubs that sprang up on America's west coast after WWII to ... more

  • Handlebar Riser Castings

    Handlebar Riser Castings

    Reproductions of the original riser castings as used on 1909-1915 stock IOE models and on factory racers. Use them to build your personal handlebars, shaped to your likings. Will ... more

  • Wrecking Crew Flat Track T-Shirts

    Wrecking Crew Flat Track T-Shirts

    These quality preshrunk T-shirts with Wrecking Crew Flat Track design on the chest are made from pure, combed cotton. more

  • Bates Tires Baja 100

    Bates Tires Baja 100

    Gravel, rocks and roadkill – here’s an awesome tire knowing no fear. Whistle into town, come back home across the fields Steve McQueen style. Do some hooligan racing among friends ... more

  • Sideburn Magazines

    Sideburn Magazines

    Sideburn was launched in early 2008 as an independent motorcycle magazine with a fanzine attitude and great connections in the motorcycle world. From the outset it was designed to ... more

  • Sudo Transparent Covers for Ignition Systems 1936-1970

    Sudo Transparent Covers for Ignition Systems 1936-1970

    See the breaker cam turn and the points spark with one of these transparent ignition covers. They mount like their stock counterparts and are made from strong acrylic material. more