Flasher unit by Badlands
This module is a direct replacement for your old broken OEM canceller and will provide similar features. Another application is when you have removed your OEM speedo to install a custom gas tank, or when you have installed a custom speedo and forfeited the operation of the OEM canceller.
Features of the Badlands module include:
• flashing automatically cancels after 11 seconds
• can be manually cancelled at any time
• with built-in emergency flasher mode
• built-in load-equalizer, runs bulbs or LEDs
Has no security circuit and is no replacement for OEM TSSM (Turn Signal Security Module) modules.
Not a plug-and-play replacement.
The module can be used in the place of 68921-01D and 68922-00D OE modules. As the module makes not use of several OE circuits only aftermarket ignition modules will work.
The module uses permanent power, ground, left and right turn signals, and left and right push-buttons from the OE harness. Ignition Enable and Start Relay terminal 2 are permanently grounded. The following circuits are not used at all:
- Ignition (green wire)
- Serial Data (light-green/violet)
- Security Dash Light (brown/violet wire)
- Alarm (light-green/brown wire)
- fits Sportster 2004-2006, Softail and Dyna 2001-2006, Road King 2001-2006, Electra Glide, Road Glide, Street Glide 2001-2006 (incl. Ultra Models) (models with carburetor and aftermarket ignition module only)
- self-cancelling
- with Deutsch 12-pin plug for OEM wiring harness
- W x H x D: 73 x 22 x 35 mm
- 12 V
- 40(80) W
- USA
- gross weight: 130 g
Has no security circuit and is no replacement for OEM TSSM (Turn Signal Security Module) modules.
Not a plug-and-play replacement.
The module can be used in the place of 68921-01D and 68922-00D OE modules. As the module makes not use of several OE circuits only aftermarket ignition modules will work.
The module uses permanent power, ground, left and right turn signals, and left and right push-buttons from the OE harness. Ignition Enable and Start Relay terminal 2 are permanently grounded. The following circuits are not used at all:
- Ignition (green wire)
- Serial Data (light-green/violet)
- Security Dash Light (brown/violet wire)
- Alarm (light-green/brown wire)
Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com