We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.



>

>

Bender Cycle



A B C D E F G H I J K L M N O P R S T U V W Y Z

Bender Cycle

Bender Cycle, headquartered in Eastlake, Ohio, USA, was founded in 1974 and produces/distributes Replacement parts for HD motorcycles.

Visit Website 

Products by Bender Cycle in our web shop:

Rigid Oil Line Kit for Evolution Big Twin

These oil line kits allow installation of a pressure gauge to the rocker box and thus to read oil pressure while riding. The lower end line fitting screws into the engine case. Gauge not included.

Exhaust Port Screw for Shovelhead

Cam Shims Flathead and Sportster 1937-1985

Selection of cam shims to establish the correct sideplay of all Flathead and Sportster models 1937-1985.

Bender Cycle Pushrods for Panhead and Shovelhead

These pushrods replace the factory steel pushrods. They were designed for use with hydraulic units but weigh less than the stock parts.

Rocker Arm Shafts Evolution and Twin Cam

Bolt kit by Bender Cycle; for Shock absorbers; fits Softail 1987-2017; steel, zinc plated; with washers; replaces OEM HD 4074A, and 6724; gross weight: 350 g

Repair kit by Bender Cycle; for Banana style calipers; fits FL, FX 1973-1983; steel, browned / zinc plated; thread: 1/2”-20; replaces OEM HD 44331-73, 44124-72, 45821-75, and 45822-75; gross weight: 120 g

Bushing by Bender Cycle; for Banana style calipers / Caliper mounting bracket; fits FL, FX 1973-1983; steel, browned ; length: 15 mm; replaces OEM HD 45822-75; gross weight: 10 g

Bushing by Bender Cycle; for Banana style calipers / Caliper mounting bracket; fits FL, FX 1973-1983; steel, browned ; length: 20 mm; replaces OEM HD 45821-75; gross weight: 10 g

Mounting pin by Bender Cycle; for Brake pads; for Banana style calipers; fits FL, FX 1973-1983; steel, zinc plated; replaces OEM HD 44124-72; gross weight: 20 g

Mounting pin by Bender Cycle; for Bushing; for Banana style calipers; fits FL, FX 1973-1983; steel, browned ; replaces OEM HD 44107-76; gross weight: 80 g

Pin by Bender Cycle; for Brake caliper; fits Sportster, FX 1977-1983; steel; front; replaces OEM HD 44162-77; gross weight: 10 g

Bushing by Bender Cycle; for Brake caliper; fits Sportster, FX 1977-1983; steel, L1: 13.4mm / L2: 19.5mm; front; ID x OD: 9.6 x 12 mm; replaces OEM HD 46019-77; gross weight: 10 g

Repair kit by Bender Cycle; for Bleeder screw / Brake caliper / Wheel brake cylinder; steel; thread: 7/16”-20; gross weight: 20 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 1.27 mm; replaces OEM HD 25550-36; USA; gross weight: 3 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 1.40 mm; replaces OEM HD 25551-36; USA; gross weight: 3 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 1.52 mm; replaces OEM HD 25552-36; USA; gross weight: 3 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 1.65 mm; replaces OEM HD 25553-36; USA; gross weight: 3 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 1.78 mm; replaces OEM HD 25554-36; USA; gross weight: 3 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 1.91 mm; replaces OEM HD 25555-36; USA; gross weight: 3 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 2.03 mm; replaces OEM HD 25556-79; USA; gross weight: 4 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 2.16 mm; replaces OEM HD 25557-79; USA; gross weight: 4 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 2.29 mm; replaces OEM HD 25558-79; USA; gross weight: 4 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 2.41 mm; replaces OEM HD 25559-79; USA; gross weight: 4 g

Cam shim by Bender Cycle; fits Big Twins OHV 1936-1999; steel; thickness: 2.54 mm; USA; gross weight: 4 g

Thrust washer by Bender Cycle; for Flywheels; fits OHV BT 74“/80“ 1941-1999, Sportster 1972-early 1987; brass, precision ground; ID x OD: 35.7 x 53.1 mm, 1.52 mm thick; replaces OEM HD 6505, 6506, and 23973-41; USA; gross weight: 36 g