W&W Cycles

Hammer Sycle Mid Shift Control Plate

Mid position shift control for 1970-99 Big Twin crankcases (4 speed or Softails®) with open belt drive systems. Yield a perfect seating position for a more positive control of the ... more

K-Tech® Kick Stand

Machined from billet brass with a polished finish and equipped with an internal ball spring for a real clean look. Installation requires welding of the supplied steel tab on the ... more

Kellermann® BL 1000 LED

The Kellermann BL 1000 turn signals are also available with LED technology and clear lenses. The intense brightness in combination with direct response yields more safety in ... more

Kellermann® BL 1000 LED PL

These LED turn signals by Kellermann feature an additional super bright, integrated running light. This signal/running light combination with its clear double lens significantly ... more

Kellermann® BL 1000 LED Dark

Until it starts flashing the BL 1000 Dark stays almost invisible on your handlebars. This is made possible with its black housing, dark tinted lenses and LED technology. more

8130 Classic Moc

Classic 6” work boots which are made to withstand the rigors of hard work and the brutality of harsh weather. These boots earned their reputation on the farms and and in the ... more

Panhead Restoration

Well-known author Rick Schunk starts his book with a brief history lesson, followed by a list of things to look for, and avoid, when shopping for a Panhead. The next section is ... more

Jerrycans "On-the-road"

Small plastic jerrycans which can be easily carried in the saddlebags for those extra miles. TÜV-approved and suited for all sorts of gas. Choose from 2 or 3 litre cans. more

Hammer Sycle Pressure Plates

Beautiful and sturdy performance clutch pressure plate which does not distort even under severe use. Cast from aluminum and available in a tumbled or sand-blasted finish. Works ... more

AES Bypass Modules by Pistor

Add some sound to your stocker. The Active Exhaust System (AES) was introduced on the European 2007 Big Twin models. It is an ECM-controlled electric motor to open or close a ... more

Vance & Hines Blackout XL 2-1

Without a doubt, two of the baddest looking models in the Harley Dark Custom line-up are the Sportster Iron and Nightster. And now Vance & Hines is putting out the baddest looking ... more

Vance & Hines Power Duals Touring

It’s time to get serious about the performance of your 2009-up Touring model. Power Duals is your ticket to style, quality and performance. More than just individual head pipes, ... more

V&H Hi-Output Mufflers for Touring Models

Designed specifically to address the needs of tuned motors built for high horsepower applications, (hi compression, large displacement and/or big cams). Every aspect of the ... more

Crocker Style Taillight

One of the most beautiful taillights ever. This is a gorgeous replica of the taillight as used on the legendary Crocker motorcycles which were design and technology milestones in ... more

Brass Rocker Covers

Made from solid brass sheet and highly polished. more

Handlebar Rings

Add a beautiful and classic style detail to your handlebars with these polished stainless steel rings which will give your grips a true 1950´s appearance. They mount easily on 1” ... more

RE P3 Submariner

Originally designed for use inside submarines, the P3 is currently standard issue for submariners in the U.S. Navy. Today this retro style is also a favorite among the ... more

RE Mil-Spec Standard Issue

The Mil-Spec Standard Issue sunglasses are surprisingly hat/helmet friendly and just like the other RE series still built to military spec right in Randolph, MA. They offer a ... more

Wrecking Crew® Chain Guards

These black powder-coated steel chain guards feature lightening holes for a more sporting appearance and replace the respective OEM part. more

Wrecking Crew® Belt Guards

Black powder-coated chain and belt guards with lightening holes for a more sporting appearance. Replace the respective OEM part. more

Wheel Covers

Pictures of the good old days, i.e. the Forties and the Fifties, often show bikes which sport so-called wheel covers. These were very popular accessories in their days, because ... more

Cannonball™ Leaf Spring Fork

The retro custom bike builder scene sometimes likes to experiment with parts of different brands on the same project. For example Indian parts are installed on Harleys® and vice ... more

Wrecking Crew® Oil Cooler & Filter

Oil cooler and filter combination which ideally fills the empty space on custom generator/alternator engines. Of course it can also be installed in lieu of the generator on all ... more

SportyEight™ Tank

If you like the style of the "48" model of the Sportster® line, here’s your gas tank. It works as stock replacement on all 2007-up fuel injected bikes but can also be mounted on ... more

SportyEight™ Adapter plate

Adapter plate which bolts to the 2007-up EFI Sportster® gas tanks in lieu of the fuel pump assembly and allows for the use of conventional 21 mm petcocks and thus the installation ... more

WR style Racing - Tanks 750

Absolutely perfect reproductions of the original WR gas tanks as used on the 1946-52 production race bikes of the same name. The narrow shape and omission of the speedo assembly ... more

WR style Racing-Tanks BigTwins

Finally available again - Racing gas tanks for Big Twins. Shaped after the legendary WR model tanks of the late forties and early fifties, the beautiful narrow design and ... more

Moon Oil Pressure Gauge

Liquid filled 0-60 psi oil pressure gauge with chromed housing. Choose from a black face with Mooneyes logo or a jeweled metal face. more

Vance & Hines Competition Series V-Rod®

A replica of the Destroyer Series exhaust, this system is designed specifically for all 2002-09 V-Rod® models except VRXSE Destroyer and VRSCF Muscle. It features stepped head ... more

V&H 2-2 XR-1200 Widow Exhaust System

There’s no better way to squeeze out the full potential of the XR 1200’s high output motor than with the new Vance & Hines Widow XR. Employing performance tuned headers with a ... more

Adjustable Kess-Tech Mufflers

Large selection of adjustable Slip-On muffler sets for OEM Headers. The selection consists of street-legal mufflers with ESM technology (Electronic Sound Management) or as MMV ... more

XR 750 Gas Tank

Stunning reproduction of the racing gas tank as used on the famous XR 750 Dirt Track race bikes, completely hand-made from aluminum. Fits XR 750, but can also be used as a ... more

XR 750 Exhaust

The mother of all Drag Pipes. These beautifully bent pipes are reproductions of the competition headers for early XR and XLCH models. Luckily they fit all iron head Sportsters® so ... more

Language

Shopping cart

Accessories Shop

Catalog 2010

Old Style Fork

Sporty Eight Conversion

Faak2010

A Bombers 2010

FlywheelParty 2010

Superrally 2010

Joints Custom Bike 2010

Limpnickie 2010

Willie's Tropical Tattoo 2010

Knuckles are back.